The thermal power plants are using a large amount of cooling water. In most cases, use driver/well or lake water. The level of water contamination will decide plant equipment adverse effects. With an open cooling tower, many solids can enter the systems and cause problems like clogging heat exchangers to mention some problem. Rinsing these systems are often expensive and require often shut down of equipment.TWF filters can also be used to filter the seal water from turbine bearings.

In the energy industry, water is most commonly used for cooling thermal energy transportation. 

If you own an energy plant, chances are high that you will find water there that needs to be rinsed. It can be used for cooling, transporting heat, pushing turbines etc.

If we are talking about microorganisms, the water conditions within the facility could turn out highly beneficial for microbial growth, and this can over time obstruct pipes, cause structural damage that endangers safety and also causing economic damage. If you are simply pumping water from an accumulation lake to the turbines, at those speeds, even the smallest fragments may cause damage.

With Top Water  filters you can be assured that no particles bigger than 37 micron will ever enter the system.

If you want to find out more, feel free to reach out to us.